Basic Information; Safety Instructions - flamco Meibes MeiFlow TOP S Montageanleitung

1. Basic information

Please follow these safety instructions carefully to eliminate hazards, personal injury and material
damage. The installation, commissioning, inspection, maintenance and servicing may only be
performed by an approved, specialist company. Please familiarise yourself with all the parts and
their handling before starting work. Observe all applicable safety regulations, environmental
regulations and legislation for the assembly, installation and operation of the system. In addition,
observe the applicable safety provisions of the DIN, EN, DVGW, VDI and VDE and all relevant country-
specific standards, laws and guidelines. When working on the system: Disconnect the system
from the mains and monitor it to ensure that no voltage is being supplied (e.g. at the separate
cut-out or a main switch). Secure the system against being restarted. Repairs to safty components
are not permitted, these must be replaced. The installation location must be dry and frost proof.
Be aware of surround equipment and the local environment in relation to the safe operation of this
equipment Free access to the equipment is required.
Please also refer to the separately enclosed instructions from other manufacturers for additional
information (e.g. pumps, servomotors, controllers).

1.1 Safety instructions

Please follow these safety instructions carefully to prevent hazards and injury to persons and property.
These operating instructions are primarily designed for the safe use and installation of the device
and make no claims to completeness.
These operating instructions describe the functionality of the device and are intended to provide
information about the required safety instructions and to draw attention to possible hazards.
These operating instructions are valid only for the described device and are not subject to the
manufacturer's revision service. The sketches and drawings they contain are not to scale.
• Keep the operating instructions within easy reach of all employees instructed to carry out work
on the device so that they can refer to them as required.
• Keep the operating instructions in a clean, complete and legible condition throughout the entire
period of use.
• Read the operating instructions before working on the device for the first time and consult them
whenever uncertainties or doubts arise as to how the device should be handled.
• Should you come across any discrepancies when reading these operating instructions or should
anything remain unclear, please contact the manufacturer.
Target group
These instructions are intended exclusively for authorised trained experts.
Only trained experts or installers authorised by the respective competent utility companies are
permitted to work on heating systems and domestic water, gas and electric circuits.
4
Manual MeiFlow Top Cooling