To ensure safe operation and avoid damaging
the product, always observe the safety
information and warnings in these instructions .
For safety and approval reasons, do not
attempt to convert and/or modify the product .
Consult a technician if you are not sure how to
use or connect the product .
Measuring instruments and their accessories
are not toys and should be kept out of the
reach of children .
Before each measurement, always make
sure that the product is set to the correct
measurement mode .
When working with the circuit, first connect the
black test probe tip to the circuit before your
connect the red test probe tip to the circuit .
While disconnecting test probes from circuit,
first remove red test probe tip from circuit and
then remove black test probe tip from circuit .
Never connect a voltage source to the
test probes if continuity test, resistance
measurement, diode test or current
measurement are selected . Otherwise, the
product could be damaged .
Always remove the test probes from the
measured object before changing the
measurement mode .
GB
15