Installing The Compressor - Gemü Q40 Betriebsanleitung

10 Inspection and maintenance
10.4 Disassembling the compressor
Risk of crushing due to the compressor
shutting down!
▶ Severe injury due to crushing or shear-
ing of the fingers.
Ensure that the actuator remains in the
●
open position while replacing the com-
pressor.
Do not reach into the tube crushing
●
area.
1. Remove the tube (see "Removing the tube", page 29).
2. Disassemble the tube holder (see "Disassembling the tube
holder", page 29).
3. Move the actuator A to the closed position.
4. Pull the compressor 2 out downwards.

10.5 Installing the compressor

Risk of crushing due to the compressor
shutting down!
▶ Severe injury due to crushing or shear-
ing of the fingers.
Ensure that the actuator remains in the
●
open position while replacing the com-
pressor.
Do not reach into the tube crushing
●
area.
1. Remove the tube (see "Removing the tube", page 29).
2. Disassemble the tube holder (see "Disassembling the tube
holder", page 29).
3. Disassemble the compressor (see "Disassembling the
compressor", page 30).
GEMÜ Q40
CAUTION
2
CAUTION
4. Insert the compressor 2 and press upwards until the com-
pressor engages.
5. Move the actuator A to the open position.
10.6 Assembling the tube holder
1. Disassemble the tube holder (see "Disassembling the tube
holder", page 29).
2. Insert the tube holder 1.
3. Tighten the fixing screw c using an Allen key.
10.7 Inserting the tube
1. Remove the tube (see "Removing the tube", page 29).
2. Insert the tube.
3. Close the tube holder 1.
30 / 36
2
1
c
1
www.gemu-group.com