Sygonix TX 4 Bedienungsanleitung Seite 50

A device for all-pin separation fro,m the mains voltage
must be provided on the installation side (e.g. FI circuit
breaker).
• The product may be operated stationarily installed.
• The product is constructed according to protection
class II.
• Do not use the product inside of rooms or in bad am-
bient conditions where fl ammable gases, vapours or
explosive dust may be or are present! There is a danger
of explosion!
• If you have reason to assume that safe operation is
no longer possible, disconnect the product imme-
diately and secure it against inadvertent operation
(turn out associated fuse or deactivate circuit breaker,
deactivate associated FI circuit breaker) and secure
against inadvertent operation.
Then have the product inspected by a specialist.
It must be assumed that safe operation is no longer
possible, if:
- the product is visibly damaged
- the product does not work or not work properly
(fl ickering light, smoke or burnt smell, audible
crackling, discolouration of the product or adjacent
surfaces)
- the product was stored under unfavourable condi-
tions
- if it was subjected to heavy stress during transport
49