Technical Features; Safety; Explosion And Fire Hazard - Formula 1 Power Jumpstarter PJ125 Originalbetriebsanleitung

EN
Pure si- - in addition to the modified
nusoidal sinusoidal wave examples
wave Coffee makers
Shavers
Audio amplifiers

Technical features

The power inverter is equipped with technical
features to protect itself and/or connected exter-
nal devices.
An alarm sounds when protection is active.
Feature Description
Overvoltage pro- If the input voltage exceeds
tection 15.5 V ± 0.5 V the power
inverter will switch off.
The voltage converter
automatically switches on
again when the input voltage
reaches nominal voltage
again.
Low-voltage protec- If the input voltage drops
tion (protection for below 10,0 V ± 0,5 V.
the battery of the When the input voltage
vehicle) returns to the rated voltage,
the voltage transformer
automatically switches
back on.
Short-circuit pro- Automatic cut off
tection
Overheat protection If the indoor temperature
rises above approx. 68 °C
the unit will automatically
switch off.
If the temperature falls
below 35 ˚C, the voltage
converter automatically
switches on again.
Overload protection The unit will automatically
switch off.

Safety

General Safety Guidelines
Read all safety notes and instructions. Failure to
observe the safety notes and instructions may
result in electric shock, fire and/or serious inju-
ries. Please keep all safety notes and instructions
for future reference.
18 f1.mts-gruppe.com
Warning!
Risk of bodily or fatal injury to children! Risk of
suffocation or strangulation! Keep the machine
out of the reach of children. Children are unable
to assess the risks associated with use of this
product!
Danger!
Damaged leads may cause fatal electric shock.
Discontinue use if leads are damaged.
The manufacture is not responsible for damages
caused by:
•
Improper connection and/or operation.
•
External forces, damage to the device and/or
damage to parts of the device due to mechani-
cal impacts or overload.
•
Any type of modifications to the device.
•
Using the device for purposes not described in
this operating manual.
•
Subsequent damages from improper and/or
incorrect use and/or defective batteries.
•
Moisture and/or inadequate ventilation.
•
Unauthorised opening of the device.
This will void the warranty.
Explosion and fire
hazard!
•
Keep sources of ignition (e.g. lit cigarettes)
away from battery.
•
The device and the drained battery must have
the same voltage (see specifications on the
battery).
•
Do not use the device in rooms where explosive
or flammable substances are stored (e.g. petrol
or solvents).
•
Always place the device in a safe, well-ventila-
ted area.
•
Thaw frozen batteries before starting.
•
Ensure the on-board voltage matches the input
voltage (15 V DC) specified on the device to
prevent a fire hazard and damage to the device.
•
The vehicle's engine displacement must be
within the approved range of the jumper leads.
•
The drained battery must be connected to the
on-board power supply.
•
Only use chargers recommended by the
manufacturer. Using other chargers may result
in a fire.
•
Do not expose the device to direct sunlight.
•
Batteries can burst or explode if thrown into
fire or exposed to extreme heat. Do not expose
the device to extreme heat.