Functionality; Normal Use; Contents; Technical Data - Formula 1 Power Jumpstarter PJ125 Originalbetriebsanleitung

EN
Danger!
Immediate danger to life or severe
injuries
Warning!
Serious injuries, potentially life-
threatening
Caution!
Light to moderate injuries
Attention!
Risk of property damage.
Note:
These operating instructions also refer to the air
and power station as device.
This operating manual applies to the following
products:
•
Air and Power Station JP 10

Functionality

The JP 10 air and power station is a portable
device with a powerful compressor and built-in
12 V battery pack. With this convenient inflator
you can inflate car and bike tires, balls and other
inflatables. It has different valve adapters for
this purpose. The display on this device is used
to set the desired air pressure up to 10 bar. The
integrated 12 V battery pack on this device can
be used as a 12 V power source via the vehicle's
power sockets. The voltage converter option
converts 12 V direct voltage to 230 V/50 Hz
alternating voltage and/or direct voltage of 5 V/
max. 2.4 A (2.0 USB). The battery pack is charged
via 230 V power supply. The jump start function
allows starting a vehicle with a drained battery by
bridging it to the integrated battery pack. The dis-
play shows the battery capacity and the charge
level of the battery pack. With 5 LEDs and lighted
display to use at twilight and at night.

Normal use

The JP 10 air and power station is suitable to
jump start a vehicle with drained battery and to
inflate car, motorcycle and bike tyres, as well as
inflatable sporting goods, toys and recreation
products. Power from the integrated voltage
converter may only be output via the 12 V car
power socket, 230 V power socket and the USB
ports. The air and power station is intended to be
powered by the integrated 12 V battery pack. The
compressor is not designed for continuous duty.
This device is not intended for use by children or
persons with limited mental capacity or lacking
experience and/or lacking expertise. Children
should be supervised to ensure they do not play
with the device.
16 f1.mts-gruppe.com
This device is not intended for commercial use.
Any other use or modification of the device is
considered improper and involves significant
risks. The manufacturer assumes no liability for
damages due to improper use.

Contents

Check the package contents immediately after
unpacking. Check the device and all parts for
damage. Do not use a defective device or parts.
•
Air and Power Station JP 10 with high-pressure
hose and two battery clamps
•
1 power supply 230 V
•
1 valve for sports balls
•
2 nozzles for inflatable
•
operating instruction
Please include all relevant documentation to
other users!
The operating instructions are also available at
the following Internet address:
http:/ /f1.mts-gruppe.com

Technical data

Model Air and Power Station
JP 10
Item number 10834
Dimensions in mm 313 x 270 x 285
Weight 9.2 kg
Ambient temperature 0 °C ~ +25 °C
Storage temperature 0 °C ~ +25 °C
Fuse 2 x 15 A
Input Charging mains adapter:
15.0 V DC
Storage battery
Battery type 12 V AGM battery
Battery capacity 18,0 Ah
Operating temperature 0 °C ~ 25 °C
Battery capacity display digital, display in %
Charging time approx. 20 - 22 hours
using the 230 V charging
mains adapter
Jumper leads
Peak amps 1250 A