Maintaining The Blade - Toro 22275 Bedienungsanleitung

Maintaining the Blade

Always mow with a sharp blade. A sharp blade cuts
cleanly and without tearing or shredding the grass
blades.
1. Shut off the machine and wait for all moving
parts to stop.
2. Remove the battery pack; refer to
Battery Pack from the Machine (page
3. Tip the machine onto its side as shown in
23.
Figure 23
1. Blade
2. Accelerator
Removing the
19).
Figure
g240550
3. Blade bolt and lock washer
Inspecting the Blade
Service Interval: Before each use or daily—Inspect
the mower blades for wear or
damage.
Carefully examine the blade for sharpness and wear,
especially where the flat and the curved parts meet
(Figure 24A). Because sand and abrasive material
can wear away the metal that connects the flat and
curved parts of the blade, check the blade before
using the machine. If you notice a slot or wear
24B and Figure 24C), replace the blade; refer to
Removing the Blade (page
1. Sail
2. Flat part of the blade
Note:
For the best performance, install a new blade
before the mowing season begins. During the year,
file down any small nicks to maintain the cutting edge.
DANGER
A worn or damaged blade can break, and a
piece of the blade could be thrown toward you
or bystanders, resulting in serious personal
injury or death.
• Inspect the blade periodically for wear or
damage.
• Replace a worn or damaged blade.
Inspecting the Accelerator
Service Interval: Before each use or daily—Inspect
the accelerator for wear or damage.
24
25).
Figure 24
3. Wear
4. Slot formed
(Figure
g002278