Klarstein DELICATESSA 90 HYBRID Bedienungsanleitung Seite 75

Problem
Pans do not become hot
and appears in the
display.
The induction hob or a
cooking zone has turned
itself off unexpectedly,
a tone sounds and an
error code is displayed
(typically alternating with
one or two digits in the
cooking timer display).
Failure Display and Inspection
The induction hob is equipped with a self diagnostic function. With this test the
technician is able to check the function of several components without disassembling or
dismounting the hob from the working surface.
Error Code
F3/F4
F9/FA
E1/E2
E3
E5
Possible causes
1. The induction hob
cannot detect the
pan because it is not
suitable for induction
cooking.
2. The induction hob
cannot detect the
pan because it is too
small for the cooking
zone or not properly
centred on it.
Technical fault.
Possible causes
Temperature sensor of the
induction coil failure
Temperature sensor of the
IGBT failure.
Abnormal supply voltage
High temperature of the
induction coil temperature
sensor
High temperature of the
IGBT temperature sensor
Possible solutions
Use cookware suitable for
induction cooking. See
section „Choosing the
right cookware".
Centre the pan and make
sure that its base matches
the size of the cooking
zone.
Please make a note of the
error code, switch off the
device or disconnect the
device from the power
supply and contact
customer service or a
qualified electrician.
What to do
Please contact the
costumer service.
Please contact the
costumer service.
Please inspect whether
power supply is normal.
Power on after the power
supply is normal.
Please contact the
costumer service..
Please restart after the hob
cools down.
EN
75