Data Access; Data Import; Basic Settings (Aquasuite) - Aqua Computer LEAKSHIELD Betriebs- Und Montageanleitung

aqua computer
the data sources to export by clicking the plus symbol in the "Data sources" win-
dow section. By clicking the gear symbol, the name of the corresponding value
can be changed. Up to 30 data sources can be added to each export data set, the
total number of export data sets is limited to 10. All selected values will be trans-
mitted to the Aqua Computer server by the Aqua Computer background service
approximately every 15 seconds, even after closing the aquasuite.
Notice regarding data security: All data contained in the configured export data
sets is transmitted to the Aqua Computer server with transport security. The server
stores the data set in volatile memory until a new data set is received or until 10
minutes have passed. Data received is not permanently stored, data is also not
correlated to IP addresses or other personal data. Data on the server may be ac -
cessed by anyone without restrictions, furthermore automatic data collection and
recording through third parties is possible. Use the data export feature for data
that you want to publish publicly and are allowed to do so only.

19.2. Data access

Published data can be obtained from the Aqua Computer server in va-
rious formats. Generally, the "access key" is required to access data.
In addition to access through any internet browser and importing data into the
aquasuite, data is also available in JSON format and compatible to Circonus.
Furthermore, the server generates banner images in two different sizes from the
transmitted data, suitable to be included in forums signatures. The code required
for the Aqua Computer forums is provided for your convenience.

19.3. Data import

To import a data set from the Aqua Computer server, the "access key" of
the data set is required. The access key can be found in the aquasuite on
the computer providing the data in the "Data access" section.
Create a new import entry by clicking the plus symbol in the upper right corner of
the "Data import" window. Enter the access key of the data set to be imported. Up
to 10 data sets (each containing up to 30 values) can be configured.
In order to verify that data is being imported, use the "Data quick view" feature in
the aquasuite. Navigate to "Data from Aqua Computer service", then "aquasuite
web". For each imported data set, you should find an entry with the name of the
data set containing the individual values. It may take a few seconds before impor-
ted data is displayed.

20. Basic settings (aquasuite)

Click the entry "Settings" below the headline "aquasuite" to access basic
settings for language, units and start-up of the software.
© 2020 Aqua Computer GmbH & Co. KG
Gelliehäuser Str. 1, 37130 Gleichen
LEAKSHIELD
- 29 -