aqua
computer
LEAKSHIELD
16.2. Automatic profile selection
Profiles can be activated automatically using the global profiles feature of the
aquasuite, see chapter 14.2. for details.
16.3. Profile configuration
All configuration changes are automatically stored in the currently active profile.
The current configuration can also be stored in any other profile by clicking the
corresponding button.
17. System settings
Select "System" from the device list below the "LEAKSHIELD" entry.
17.1. Device information
The details displayed here might be required when you contact our service for sup-
port. You may enter a "Device description" for easier identification, this text will be
displayed in the device list and in the data quick view.
A maintenance indicator is also shown. If this indicator has reached 0%, mainte-
nance by Aqua Computer with replacement of the vacuum pump and valves is ne-
cessary.
17.2. Device settings
After pressing the "Reset device to factory settings" button or the corresponding
menu item, the default values are loaded. The device must then be completely re-
configured!
The settings can also be exported and imported in this section. The Pump runtime
diagram can be deleted by clicking on the corresponding item.
17.3. Time settings
For the internal clock in LEAKSHIELD, the time zone can be selected here and the
device time can be updated from the PC. In addition, the date and time format
can be set.
Note: LEAKSHIELD does not have a clock buffered by a battery. After a power fai -
lure, the time must be reset.
- 26 -
Aqua Computer GmbH & Co. KG
© 2020
Gelliehäuser Str. 1, 37130 Gleichen