Pressure Change; Pump Speed; Flow; Software Sensors - Aqua Computer LEAKSHIELD Betriebs- Und Montageanleitung

aqua computer
LEAKSHIELD

11.4. Pressure change

The fourth displayed sensor provides similar information as the volume change va-
lue, but here the pressure change is given in mbar per minute.

11.5. Pump speed

The fifth displayed sensor shows the current pump speed (if available). This value is
transmitted via USB from the Aqua Computer background service to LEAKSHIELD.
You can customize the sensor name and log interval.
In the configuration you can also view the settings of the wizard for the "Pump"
area and change them directly. You can find more information about the details in
chapter 10.1 (Pump). However, we recommend to make the settings only using the
wizard.

11.6. Flow

The sixth sensor displayed is the flow measurement value of your system (if availa-
ble). This value is transmitted via USB from the Aqua Computer background ser-
vice to LEAKSHIELD.
In the configuration, you also have direct access to the settings made in the wizard
in the "Flow" area. In addition, you can adjust the sensor name and the log inter-
val.
You can find more information about the details in chapter 10.1 (Flow). We re-
commend that you only make the settings using the wizard.

11.7. Software sensors

The last twelve sensors in the list are software sensors and can be used to transmit
sensor data that is not physically available to LEAKSHIELD from the computer by
USB connection.
Select the appropriate unit for each configured data source. For manipulation of
the displayed sensor value, a scale factor and an offset may be configured. Data
from third party software regularly requires the scale factor to be adjusted.
Transmission of sensor data via USB interface
During installation of the aquasuite, the background service "Aqua Computer Ser-
vice" is also installed. This service supplies various data from PC components and
imported data from aquasuite web, additionally sensor data provided by third par-
ty software can be accessed. In order to access third party software data, the third
party software has to be correctly installed, configured and running.
- 20 - Aqua Computer GmbH & Co. KG © 2020
Gelliehäuser Str. 1, 37130 Gleichen