General Safety Notes - TESTBOY TB-3000 Bedienungsanleitung

Notes

General safety notes

Please observe the following five safety rules:
1 Disconnect.
2 Ensure that the instrument cannot be turned back on again.
3 Ensure isolation from the main supply voltage (check that there
4 Earth and short-circuit.
5 Cover neighbouring parts that are under live electrical load.
22
WARNING
Unauthorized changes or modifications of the instrument are
forbidden – such changes put the approval (CE) and safety of
the instrument at risk. In order to operate the instrument safely,
you must always observe the safety instructions, warnings and
the information in the "Proper and Intended Use" Chapter.
WARNING
Please observe the following information before using the
instrument:
|
Do not operate the instrument in the proximity of electrical
welders, induction heaters and other electromagnetic fields.
|
After an abrupt temperature fluctuation, the instrument
should be allowed to adjust to the new temperature for
about 30 minutes before using it. This helps to stabilize the
IR sensor.
|
Do not expose the instrument to high temperatures for
a long period of time.
|
Avoid dusty and humid surroundings.
|
Measurement instruments and their accessories are not
toys. Children should never be allowed access to them!
|
In industrial institutions, you must follow the accident
prevention regulations for electrical facilities and equipment,
as established by your employer's liability insurance
organization.
is no voltage on both poles).
®
Testboy TB-3000