Inserting The Bobbin - ELNA eXplore 340 Gebrauchsanleitung

Inserting the bobbin

Place the bobbin in the bobbin case with the thread
1
running off as illustrated.
1
Thread
Guide the thread into the front notch on the front side
2
of the bobbin case. Draw the thread to the left,
sliding it between the tension spring blades.
2
Front notch
3
Tension spring blade
Continue to draw the thread lightly until the thread
3
slips into the side notch.
4
Side notch
Pull out about 4" (10 cm) of thread. Attach the bobbin
4
cover plate. Refer to the chart on the bobbin cover
plate for proper threading.
5
Thread
6
Hook cover plate
28