Troubleshooting During Use - Depuy Synthes PUREVUE 242302 Gebrauchsanweisung

Problem
Camera indicator
light does not turn on
6.2

Troubleshooting During Use

Problem Causes
Video output cable
disconnected from device
Video output cable
disconnected from display
Display disconnected from
power or turned off
Display settings changed
Loss of Video
Device disconnected from
power or powered off
Video resolution changed
Video timing changed
Color Bars appear Camera Head disconnected
Causes
Camera Head not connected
Camera Head not recognized
by device
Supply Mains switch OFF
Power switch OFF
45
Possible Solution
Connect Camera Head to device
Ensure the Camera Head is properly
connected . Reset Camera Control
System
Power ON Supply Mains switch
Power ON Power Switch
Possible Solution
Connect video cable to device output
Connect video cable to display input
Ensure display is connected to power
and turned on
Ensure display settings are correctly
set
Ensure device is connected to power
with Supply Mains Switch powered
ON . Power ON Power Switch
Video resolution changes cause
temporary video loss . If video loss
persists, reset device
Video timing changes cause temporary
video loss . If video loss persists, reset
device
Reconnect Camera Head