Setting Up The Camera Control System; Figure 4. Connecting The Light Cable And Camera Head - Depuy Synthes PUREVUE 242302 Gebrauchsanweisung

4.4

Setting up the Camera Control System

1 . Press the power button to turn on the device .
Icon Description
Power on
If a camera head and light cable are connected, live video appears . If no camera head and
light cable are connected, the Display shows color bars .
2 . Connect the male Camera Head Connector on the Camera Head cable to the female
Camera Head connector on the Camera Control System (Figure 4A) .
3 . Align the arrow on the male connector with the arrow on the female connector and insert .
If the device is turned on, a blue LED illuminates above the Camera Head Connector when
the Camera Head Connector is properly connected (Figure 4A) .
Icon Description
Camera Head
4 . Push the male Light Cable connector into the female connector on the Camera Control
System until the cable seats into place (Figure 4B) .
Icon Description
Connect Light Cable
Figure 4.
5 . Attach the coupler, endoscope, and distal end of the Light Cable as described in their
Instructions for Use .
6 . Turn on the Light Source by pressing Light Source button on the LCD Touch Screen . The
light source illuminates .
A
Connecting the Light Cable and Camera Head
19
B