Setting Up And Using The Perfect Mama; Installation Of Batteries - TensCare perfect mama+ Bedienungsanleitung

When the contractions are less than
5 minutes apart and they last longer
than 30 seconds, the display will be
flashing.
After 30 minutes, this flashing will
stop, and the normal display will
resume.
If you prefer not to see these time
displays, you can turn them off:
Hold down the buttons T and ▼
together for 3 to 5 seconds to turn off
the contraction timer display.
Hold down the buttons T and ▲
together for 3 to 5 seconds to turn the
contraction timer display back on.
Last contraction
duration (in seconds)
Interval between the
last two contractions
(in minutes.seconds)
11. SETTING UP AND
USING THE PERFECT
MAMA+
11.1. INSTALLATION OF
BATTERIES
1) Remove belt clip by sliding down.
2) Remove battery cover by pulling on
tag.
3) Insert batteries.
Ensure that the batteries are inserted
the right way as shown in battery
compartment and that the ribbon is
behind them.
4) Replace battery cover and belt clip.
When
running low, a low battery
indicator will show on the
screen and it is important to change the
batteries as soon as possible.
Rechargeable batteries
Do not use rechargeable batteries.
They have a lower voltage and may
activate the low battery cut-out.
Caution: Remove batteries from your
Perfect mama+ if the unit is unlikely to
be used for a long period. Some types
of batteries may leak corrosive fluid.
Battery Life
Batteries should last at least 15 hours
at 50 mA, 300 μs, 50 Hz.
Unused batteries have a nominal shelf
life of 3 years, but will usually last longer
than this.
18
the batteries are