Klarstein KLIMAMOBIL Bedienungsanleitung Seite 52

EN
52
Possible plug connections (depending on model):
Step 5: Finalise installation
To connect the installation properly, the following steps must be carried out:
• Check the position of the thermostat. Make sure that the thermostat passes
through the bracket and does not touch any metal surface.
• Make sure that the ventilation flaps and the filters are positioned correctly in
the ventilation grid.
• Attach the ventilation grid to the indoor component with 4 screws (see picture below).
• Put the screw caps on the 4 screws.
• Switch on the power supply and check whether the appliance is working.
4 screws and
screw caps
Frame
Lower casing with
ventilation grid