Klarstein KLIMAMOBIL Bedienungsanleitung Seite 40

EN
40
Press the button to allow the set or current room temperature
to be displayed. When you switch on the unit for the first time,
the display shows the set temperature. When you switch to [
] from another display, the current room temperature is shown.
If you do not make an entry within the next 5 seconds, the set
temperature is displayed again, If no specific display is set, the
set temperature is displayed by default.
10 TEMP
When you have switched on the appliance, press the button to
allow the set temperature [
again to allow the current room temperature [
Press the button again to keep the current display status [
If the current display shows the current room temperature and
you press the button once, the set temperature is displayed for
5 seconds, then the display changes back to the current room
temperature.
Press TIMER OFF to set a switch-off timer. Press the button
TIMER
11 again to deactivate the timer. The switch-off timer is set in the
OFF
same way as the switch-on timer again.
In heating or cooling mode, press the button to activate the
TURBO function. The corresponding symbol in the display lights
12 TURBO
up. If you change the mode or fan speed, the TURBO function is
automatically deactivated.
Press this button to select Sleep ON and Sleep OFF. Sleep OFF
is set by default. When you turn off the appliance, the sleep
function will be deactivated. After you have activated the
13 SLEEP
function, the symbol lights up in the display and you can set
the desired time. This function is not available in fan and auto
mode.
Press the button to switch the display illumination on and off.
When the light is on, the light symbol [
14 LIGHT
select Light OFF, the symbol is still displayed but the display
illumination goes out.
] to be displayed. Press the button
]to be displayed
] is displayed. If you
].