Hoover Robot Cleaner Bedienungsanleitung Seite 8

GB
8
Cleaning Programs
The robot offers different cleaning programs which adapt to different cleaning needs:
AUTO CLEANING MODE
Press the Start/Pause Button on the remote control, on the product or use Wifi application, the robot will
automatically start operating.
The robot vacuums in an organized and efficient way, it features gyroscopic navigation to provide
precise directional signals. [Fig. 12]
SPOT CLEANING MODE
Press the Spot Button on the remote control, on the product or use the Wifi application*, the robot
will automatically start operating. It cleans intensively a confined area following a circular path turning
automatically the power on TURBO power level. [Fig. 13]
FULL & GO CLEANING MODE
Press the FULL & GO button on the remote control or the Wifi application* to make robot return to the
base. On the display the FULL & GO indicator will be illuminated. After being fully charged, the robot will
Fig. 12
automatically start a new cleaning cycle and the FULL & GO option will be reset. [Fig. 14]
If you want to delete this mode, press again FULL & GO on the remote control.
MANUAL CLEANING MODE
The robot can be controlled manually at any time during a cleaning program. The navigation arrow
buttons on the remote control / WiFi application* will move the robot in the desired direction with the
suction activated.
EDGE CLEANING MODE
Press Edge Cleaning mode in the Wifi application*. It will automatically start cleaning along walls,
around furniture etc. [Fig. 15]
HOME MODE:
You can command your robot return to the Home charging station for charging by:
1. Press the Home button on the robot
2. Press the Home button on the remote control
Fig. 13
3. Following the instruction in the WiFi Application*.
NOTE: The Robot will return to its home charging station when the cleaning session is started from the
charging base.
Setting Power Level
Press MODE button on the remote control or use the Wifi application* to select the desired power level.
Choose between:
• Silent Power
• Standard Power
• Turbo Power
Fig. 14
Icons on product display will illuminate according to your choice. [Fig. 16]
Setting up the Cleaning Schedule with remote control
The robot can be programmed to automatically clean each day or on specific days as desired.
To set up a cleaning schedule over one week complete the following:
1. Press the scheduling function button on the remote control. A flashing box will appear around M
(Monday).
2. Use the right and left arrow buttons to select the desired day and then press the Start/Pause button
to confirm that day. You can also choose multiple days(up to 7days) and different hours for each day.
3. Once the day of the week has been selected, you can decide the hour of the cleaning schedule:
use the up arrow , the hour will start flashing on the display , use the up and down arrow to select the
desired hour. Press the Start/Pause confirmation button.
Fig. 15
4. The minute display will flash, use the up and down arrow keys to select the desired minute. Press the
Start/Pause confirmation button.
5. Press the scheduling function button to save the time and week settings. You can easily see it,
thanks to the illuminated dash under scheduled day/days.
If you want to reset the scheduling settings, press the scheduling function button, use the right and left
arrow buttons and press the Start/Pause button to delete the schedule on the specific day/days.
With WiFi Application*
Following the instruction in the WiFi Application*.
Fig. 16
* Certain Models Only