Commissioning; Connecting The Ip Dect Server - Auerswald COMfortel WS-400 IP Inbetriebnahmeanleitung

Commissioning

This section describes how to commission the device. This
includes the connection of the device, the logging onto the con-
figuration manager and an initial configuration.
Commissioning Overview

Connecting the IP DECT server

1.
Opening the Configuration Manager
2.
Configuring the IP DECT server
3.
Network settings
Security settings
SIP settings
Configuring a DECT handset
Registering a DECT handset to the IP DECT server
4.
(page 32)
Activating the IP DECT server multicell server license
5.
(page 32)
Default Settings when the Equipment is Supplied
– Access data for the Configuration Manager :
User name: admin
Password: admin (password before firmware version 14A:
ip6000)
– Network settings:
DCHP enabled
– Network addresses (If no DHCP server is available in the
network):
IP address: 192.168.0.1
Network mask: 255.255.255.0
Connecting the IP DECT Server
Requirements
– Network cable
Insert one of the network cable's plugs in the RJ45 socket on
1.
the front of the device.
Insert the plug on the other end of the network cable into a
2.
network socket with PoE power.
28
Commissioning
(page
(page
(page 30)
COMfortel WS-400 IP - Setup V04 02/2016
(page 28)
(page
29)
30)
(page 31)
29)