Practical Guide For The Operator; Preparing The Machine For Work; Controls - Tennant T291 Bedienungsanleitung

Before starting work, wear overalls, ear protectors, non-slip and waterproof shoes, mask to protect the respiratory tract, gloves and all
Never leave the machine unattended or parked with the electronic ignition key inserted.
For a complete and up-to-date list of the detergents and chemicals available, contact the Manufacturer.
Follow the safety regulations on use of detergents given in the section "Safety regulations".

Preparing the machine for work

Proceed as follows before starting work:
Check that the display shows the batteries to be fully charged. Recharge if necessary. See the "Battery maintenance and charging" sec-
tion.
Make sure that the dirty water tank is empty. Empty it if necessary, see "Emptying the dirty water tank".
Make sure that the solution tank is full. Fill it if necessary, see "Filling the water/detergent
Dose" accessory, add detergent to the tank in the required percentage, using the measuring cap.

Controls

:
The alarms (see chapter "Alarms on the display").

PRACTICAL GUIDE FOR THE OPERATOR

other personal protection devices necessitated by the work environment.
1
2
! WARNING
! WARNING
! INFORMATION
familiarity.
! WARNING
! WARNING
8
6 7
5
4
3
ENGLISH
tank"
7
17