Squeegee installation and adjustment
Squeegee adjustment
wear should be checked frequently.
For perfect drying, the squeegee must be adjusted in such a way that the edge of the rear blade bends during operation by about 45° with respect
3
4
1
6
3
5
A
6
4
2
Brush installation
Automatic brush attachment, version "Without traction" PAD ASSIST (Fig.21):
raise the machine head by pushing the head lift pedal down and to the left, then using the operation selector, select the
the head lift pedal down and to the right and activate the drive lever momentarily; the brush will be attached automatically
Automatic brush attachment, version "With Traction"
PROPEL
(Fig.21):
raise the machine head by pushing the head lift pedal down and to the left, then using the operation selector, select the
the head lift pedal down and to the right, turn the selector to the "OFF" position, press the "SET" button once then press
Automatic brush release version PAD ASSIST / PROPEL
(Fig.21): raise the machine head by pushing the head lift
pedal down and to the left, turn the selector to the "OFF" position, press the "SET" button once then press the "-" button,
the machine will complete the release sequence.
21
ENGLISH
15