Product Overview; Specifications; Attachments/Accessories; Operation - Toro Recycler 20961 Bedienungsanleitung

Product Overview

1. Handle
2. Self-propel bar
3. Blade-control bar
4. Adjustment knob for the
self-propel drive
5. Rear door (not shown)
6. Washout port (not shown) 14. Handle lock (2)
7. Fuel-tank cap
8. Air filter
Figure 10
1. Grass bag
Figure 9
9. Cutting-height lever (4)
10. Spark plug
11. Side-discharge door
12. Oil-fill tube/dipstick
13. Bag-on-demand lever
15. Recoil-start handle
2. Side-discharge chute

Specifications

Model Weight
35 kg
20961
(77 lb)

Attachments/Accessories

A selection of Toro approved attachments and
accessories is available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or authorized Toro
distributor or go to www.Toro.com for a list of all
approved attachments and accessories.
To ensure optimum performance and continued safety
certification of the machine, use only genuine Toro
replacement parts and accessories. Replacement
parts and accessories made by other manufacturers
could be dangerous, and such use could void the
product warranty.

Operation

Note:
Determine the left and right sides of the
g198722
machine from the normal operating position.

Before Operation

Before Operation Safety

General Safety
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Check that all guards and safety devices, such as
deflectors and/or grass catcher, are in place and
working properly.
•
Always inspect the machine to ensure that the
blades, blade bolts, and cutting assembly are not
worn or damaged.
•
Inspect the area where you will use the machine,
and remove all objects that could interfere with
the operation of the machine or that the machine
g036586
could throw.
•
Adjusting the cutting height may bring you into
contact with the moving blade, causing serious
injury.
– Shut off the engine, remove the ignition key
(electric-start model only), and wait for all
moving parts to stop.
– Do not put your fingers under the housing
when adjusting the cutting height.
8
Length Width Height
152 cm 58 cm
(60 in) (23 in)
104 cm
(41 in)