Rollei HS Freeze 2s Anleitung Seite 25

Slave receiver function
Adjust the power regulation knob to
move the white frame to "Slave", short
press the knob, the white frame turns
green, adjust the knob to select the slave
receiving function "ON / OFF", short
press the knob to confirm.
Beep sound function
Adjust the power regulation knob to move the white frame to "Buzz", short press
the knob, the white frame turns green, adjust the knob to select the beep sound
function "ON /OFF", short press the knob to confirm.
„TTL" flash power is switched to "M" manual mode output power value
Adjust the power regulation knob to move the white frame to "TTL M", short press
the knob, the white frame tums green, adjust the knob to select "TTL/M" mode
function "ON / OFF", short press the knob to confirm.
Auto-Off mode
Turn the power regulation knob to move the white frame to "Auto­off", short press
the knob, the white frame turns green, adjust the knob to select the automatic
power off mode time "10 min / 30 min /OFF", short press the knob to confirm.
Backlight brightness adjustment
Adjust the power regulation knob to move the white frame to "Backlight", short
press the knob, the white frame turns green, adjust the knob to select the backlight
brightness "MIN / MID / MAX", short press the knob to confirm.
Factory setting reset
Adjust the power regulation knob to move the white frame to "Factory setting",
short press the knob, the white frame turns green, adjust the knob to select the
factory reset "YES / NO", short press the knob to confirm.
Option
Slave
Buzz
TTL – >M
Auto-off
Backlight
Factory setting NO
ON
ON
OFF
10
MAX
25