Warnings And Safety Instructions - Rollei HS Freeze 2s Anleitung

Warnings and safety instructions

Danger from electric current!
Faulty electrical installations or excessive mains voltage can cause electric shock.
• Only connect the product if the mains voltage of the socket corresponds to the
specifications on the type plate.
• Connect the product to an easily accessible power outlet so that you can quickly
disconnect it from the mains in case of problems.
• Use only the supplied power cord.
• Do not use the product if it is visibly damaged or if the cable is defective.
• If the product or its accessories are damaged, they must be replaced or repaired
by the manufacturer, its service department or a similarly qualified person to
prevent hazards.
• The housing must not be opened and repairs must only be carried out by a
qualified technician. To do this, contact a specialist workshop. Any liability and all
warranty claims are excluded in the event of repairs by the user, improper connec­
tion or incorrect operation.
• Do not use the product with an external timer or a separate remote control
system.
• If you do not use the product for a long period of time, always disconnect it from
the power source.
• Protect the product from moisture. Do not touch the product with wet/damp
hands or immerse it in water.
• This product is not waterproof! Do not use this product in the rain or in wet en­
vironments. Never touch the product during a thunderstorm.
• Only use the product with the supplied rechargeable battery.
• Before disconnecting the power or battery, turn off the unit at the main switch.
• Do not store or use the flash in places where it is exposed to strong electroma­
gnetic fields or dust. Keep the unit away from other sources of interference.
• Switch off the flash and disconnect it from the power supply (battery) when
changing the flash tube.
• Do not open or damage the battery, short­circuit it, bypass it or use it for any
other purpose.
29