Battery Maintenance - Rollei HS Freeze 2s Anleitung

Lithium battery charging
26
1. Press the battery release button and remove the battery.
2. The battery contacts are inserted in
line with the positive and negative
poles of the charger. A "click" sound
indicates that the battery has been
inserted into place.
3. The current battery level is displayed
on the charger: ''25% / 50% / 80% /
100%".
Changing the flash tube
Please observe the following instructions for
changing the flash tube*:
• Make sure that the unit is switched off and discon­
nected from the power supply. Wait until the flash
tube has cooled down before changing it. Please
always use clean cotton gloves or a microfibre cloth
when changing the flash tube.
• Uncoil the twisted ignition wire from the flash tube
holder and carefully pull the flash tube out of the unit.
• To insert a new flash tube, support the legs of the
flash tube and carefully slide the flash tube to its final
position. Then place the trigger wire around the flash
tube holder.
*Pictures similar

Battery Maintenance

Warranty: Rollei provides 6 months warranty towards Lithium batteries.
1. According to industry standards, lithium battery supports 300 – 500 times
complete charge cycles in its lifespan. Capacitance of a lithium battery goes
down with times of use. Complete charge cycle means to charge the battery from
quantity less than 10% to over 90%.
ENGLISH