Troubleshooting - Silvercrest SKHU 2 B2 Bedienungsanleitung

CAUTION
In vehicles in which the cigarette lighter also
►
works with the ignition switched off, the device
must be disconnected from the cigarette lighter
after use. Otherwise, the vehicle battery may be
discharged over a long period of time, since the
device also uses power when it is idle.

Troubleshooting

A connected device will not charge (the white
operating LED w does not light up).
No connection to the car's cigarette lighter socket.
♦
Check the connection.
Depending on the vehicle type, it is possible that
♦
the ignition has to be switched on first.
The white operating LED w goes out after a
device has been connected
The car USB adapter 9 is overloaded and will no
♦
longer charge attached devices. The internal over-
current protection has been triggered. Disconnect
all connected devices from the car USB adapter 9.
The white operating LED w lights up immediately and
the car USB adapter 9 is ready for use again.
SKHU 2 B2
GB │ CY │
15 ■