Instruction Manual - Makita DUC252 Bedienungsanleitung

ENGLISH (Original instructions)
SPECIFICATIONS
Standard guide bar
Standard saw chain
Sprocket
Overall length (without guide bar)
Net weight
Chain speed per minute
Chain oil tank volume
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change with-
out notice.
• Specifications and battery cartridge may differ from country to country.
*1 Weight, with largest battery cartridge, without guide bar and chain, empty oil tank, according to EN ISO 11681-2.
*2 Weight, with battery cartridge, guide bar, and chain, filled oil tank, according to EPTA-Procedure 01/2003.
WARNING: Use appropriate combination of the guide bar and saw chain. Otherwise personal injury may result.
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Wear eye protection.
Wear ear protection.
Wear a helmet, goggles and ear protection.
Use appropriate protection for foot-leg and
hand-arm.
This saw is to be used by properly trained
operators only.
Do not expose to rain.
Maximum permissible cut length
Direction of chain travel
Saw chain oil adjustment
Model
Guide bar length
Cutting length
Type
Type
Pitch
Gauge
No. of drive links
Number of teeth
Pitch
*1
*2
DUC252
250 mm
23 cm 24 cm
Sprocket nose bar Carving bar
91PX 25AP
9.5 mm (3/8") 6.35 mm (1/4")
1.3 mm (0.05") 1.3 mm (0.05")
40 60
6
9.5 mm (3/8") 6.35 mm (1/4")
4.6 kg
8.3 m/s (500 m/min)
D.C. 36 V
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for cutting branches / pruning trees.
It is also suitable for tree service.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745-2-13:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 2.5 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745-2-13:
Model DUC252
Work mode : cutting wood
Vibration emission (a
Uncertainty (K) : 1.5 m/s
7 ENGLISH
DUC302
300 mm
28 cm
Sprocket nose bar
90PX
9.5 mm (3/8")
1.1 mm (0.043")
46
9 6
9.5 mm (3/8")
316 mm
4.1 kg
4.7 kg
3
85 cm
D.C. 36 V
) : 84.4 dB (A)
pA
) : 95.4 dB (A)
WA
2
) : 4.7 m/s
h
2