Installation example
Example 1 (recommended): Installation when a stop surface of the scale and the sensor head is
Scale installation accuracy is improved when a stop surface is made. Th is also simplifi es reinstallation of
the scale.
1. Check and adjust the scale bracket's parallelism with respect to the machine guide, and then secure in
place.
<When using the stop surfaces>
MG
Stop surface height
Secure a scale bracket stop surface height
of 2 mm (recommended).
8
(E)
made with the bracket.
0.1
MG
0.05
Parallel pin
protrusion length
Scale bracket
Fig. 3-3
<When using parallel pins>
MG
0.1
MG
0.05
Scale bracket
Secure a parallel pin protrusion length
of 2 mm (recommended).
Unit: mm
SQ47-Z Series, CH22 Series