Ec Declaration Of Conformity - Makita BUH550 Bedienungsanleitung

ENGLISH (Original instructions)
SPECIFICATIONS
Strokes per minute (min
Overall length
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change with-
out notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbol
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Do not expose to rain.
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household waste
material!
In observance of European Directive
2012/19/EU on waste electric and elec-
tronic equipment, 2006/66/EC on batteries
and accumulators and waste batteries and
accumulators and their implementation
in accordance with national laws, electric
equipment and battery pack that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for trimming hedges.
Noise
The typical A-weighted noise level determined accord-
ing to EN60745:
Model BUH550,UH550D
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 2.5 dB (A)
Model BUH650,UH650D
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 2.5 dB (A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN60745:
Model BUH550,UH550D
Work mode : hedge trimming
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model
Blade length
-1
)
Net weight
) : 85.1 dB (A)
pA
) : 93.1 dB (A)
WA
) : 84.3 dB (A)
pA
) : 92.3 dB (A)
WA
2
) : 2.5 m/s
h
2
BUH550 UH550D
550 mm
1,000 - 1,800
1,070 mm 1,074 mm
5.1 kg
D.C.36 V
Model BUH650,UH650D
Work mode : hedge trimming
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration emission value has
been measured in accordance with the standard test
method and may be used for comparing one tool with
another.
NOTE: The declared vibration emission value may
also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual
use of the power tool can differ from the declared
emission value depending on the ways in which the
tool is used.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it is
running idle in addition to the trigger time).
For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible manufac-
turer declare that the following Makita machine(s):
Designation of Machine:
Cordless Hedge Trimmer
Model No./ Type: BUH550, UH550D, BUH650,
UH650D
Specifications: see "SPECIFICATIONS" table.
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
7 ENGLISH
BUH650 UH650D
650 mm
1,000 - 1,800
1,150 mm 1,154 mm
5.2 kg
D.C.36 V
2
) : 3.0 m/s
h
2