En-Us English; Customer Support - FLIR A50 Serie Schnelleinstieg

3 EN-US English

3.1 Read the manual before use
Go to the following website to read or download the
manual:
http://support.flir.com/resources/9s26
3.2 Extend your product warranty
Register your product now to get:
• 2 years camera warranty
To activate your extended warranty, go to http://support.flir.com/camreg.
Note Registration must be completed within 60 days of purchase.
3.3 Download FLIR software
FLIR Systems provides freeware and licensed software for image editing, video
processing, thermal analysis, and reporting.
To download FLIR Thermography software, go to http://www.flir.com/support.
3.4 Training
For training resources and courses, go to
http://www.flir.com/support-center/training.

3.5 Customer support

Do not hesitate to contact our Customer Support Center at http://support.flir.com
if you experience problems or have any questions about your product.
3.6 Quick start guide
You can power the camera by using either the power I/O connector (18–56 V DC)
or the Ethernet/power over Ethernet (PoE) connector (36–56 V DC) of the cam-
era. See Figure 2.1 View from the rear, page 2.
#T810575; r. AB/75798/75798; mul 6