En-Us English; Camera Parts - FLIR T6-Serie Erste Schritte

EN-US English

EN-US
Quick start guide
Follow this procedure to get started right
away:
1. Put a battery into the battery
compartment.
2. Charge the battery for 4 hours before
starting the camera for the first time,
or until the green battery condition
LED glows continuously.
3. Insert a memory card into the card
slot.
4. Push the
button to turn on the
camera.
5. Aim the camera toward the object of
interest.
6. Autofocus the camera by pushing the
Autofocus/Save button halfway down.
7. Push the Autofocus/Save button fully
down to save an image directly.
8. Move the image to a computer by
doing one of the following:
• Remove the memory card and
insert it into a card reader
connected to a computer.
• Connect a computer to the camera
using a USB mini-B cable.
9. Move the image from the card or
camera, using a drag-and-drop
operation.
Note: You can also move the images to
the computer using the FLIR Tools
software, which comes with your camera.
netzerotools.com

Camera parts

View from the right
1. Knob to change the dioptric
correction for the viewfinder
2. Handstrap
3. Digital zoom button
4. Autofocus/Save button
View from the left
1. Lamp for the digital camera
2. Laser pointer
3. Lamp for the digital camera
4. Infrared lens
5. Digital camera
6. Focus ring
7. Button to operate the laser pointer
netzerotools.com
23