En-Us English; Camera Parts - FLIR E series Schnelleinstieg

EN-US English

EN-US
Quick start guide
Follow this procedure to get started right
away:
1. Put a battery into the battery
compartment.
2. Charge the battery for 4 hours before
starting the camera for the first time,
or until the green battery condition
LED glows continuously.
3. Insert a memory card into the card
slot.
4. Push the button to turn on the
camera.
5. Aim the camera toward the object of
interest.
6. Focus the camera by rotating the
focus ring.
7. Pull the trigger to save an image
directly.
8. Move the image to a computer by
doing one of the following:
• Remove the memory card and
insert it into a card reader
connected to a computer.
• Connect a computer to the camera
using a USB mini-B cable.
9. Move the image from the card or
camera, using a drag-and-drop
operation.
Note: You can also move images to the
computer using the FLIR Tools software,
which comes with your camera.
© 2012, FLIR Systems, Inc. All rights reserved worldwide.
Publ. no. T559524, rev. 016

Camera parts

View from the right
1. Cover for the right-hand connectors
compartment:
• USB-A
• USB mini-B
• Power
2. Trigger to preview/save images
3. Tripod mount. Requires an adapter
(extra accessory)
4. Focus ring
5. Infrared lens
View from the left
1. Laser pointer
2. Lamp for the digital camera
27