Omnitronic DJS-1150 Scratch-Workstation Bedienungsanleitung Seite 25

6. LOOP IN/REALTIME CUE-BUTTON
By pressing the In-button, you can memorize the Cue-point. Furthermore, you can program the In-button of a
sequence which will be repeated then.
Please refer to the explanations under 6.9 Memorizing a sequence (Loop-function) and 6.8 Interactive
scratch-wheel.
7. LOOP OUT-BUTTON
By pressing the Out-button, you can memorize the Loop Out-button. The player will repeat the memorized
sequence until you press the Out-button once more.
8. RELOOP-BUTTON
Via the RELOOP-button, you can call up a memorized sequence once more.
9. BANK PROGRAMM-BUTTON
Via the Bank P. –button you can select up to 12 Banks for programming in your desired order.
After any Bank has been memorized, press the Bank P.- button for one second and „+1" will appear on the
LED display. After selecting your desired order of Banks, press the Bank P.-button again to finish
programming.
Example: 1. Press BANK P.-button (Display shows +1). 2. Press BANK 1 (Display shows +2). 3. Press
BANK 4 (Display shows +3). Press BANK 2 (Display shows +4) 5. Press BANK P. to finish.
To play BANK PROGRAMM in the sampler mode, press BANK P. Button to start playing the selected Banks
(here: Bank 1 + Bank 4 + Bank 2).
10. CUE-BUTTON
Pause-mode:
In the pause-mode, you can cue by pressing and holding the Cue-button. As soon as you let the Cue-button
loose, the player returns to the track-start or the Cue-point.
Playback-mode:
If you press the Cue-button during playback, the player returns to the track-start or the Cue-point and goes
into Pause-mode.
On the Cue-button, you can memorize the fourth Cue-point.
Please refer to the explanations under 6.7 Cueing.
11. PLAY/PAUSE-BUTTON
With the Play/Pause-button, you can start the playback and stop it again. Please refer to the explanations
under 6.4 Play/Pause.
12. SAMPLER-BUTTON
By pressing the Sampler-button (Sampler LED on), you can recall a sample you memorized on one of the
Bank-buttons before. You can select between Continuous-mode and One-shot-mode.
The memorized samples of a CD remain in the memory until you switch off the CD-player or overrite the
samples.
You can recall all memorized Cue-points, samples and effect-parameters from up to 127 CDs by switching
the CD-player on, pressing the Memory/Recall-button (LED on) and inserting the respective CD.
Please refer to the explanations under 6.10 Sampler-mode.
13. MEMORY/RECALL-BUTTON
With this button, you can memorize the current Cue-point, the current sample or the sample-parameter via
one of the three Bank-buttons. Press the Memory/Recall-button (LED on) and the desired Bank-button.
Please refer to the explanations under 6.7 Cueing and 6.10 Sampler-mode.
You can memorize up to 4 Cue-points and samples with sample-parameters of different titels and recall them
via the respective Bank-button.
Please note that the maximum sample-length is 5 seconds.
In the Effect-mode, you can memorize the adjusted effect parameters by adjusting the parameter and
pressing the Memory/Recall-button.
You can recall all memorized Cue-points, samples and effect-parameters from up to 127 CDs by switching
the CD-player on, pressing the Memory/Recall-button (LED on) and inserting the respective CD.
14. EJECT BUTTON
Via the EJECT-button, you can open and close the CD-tray. Please refer to the explanations under 6.2 CD
tray.
25/68 10602298_V_1_0.DOC