Omnitronic DJS-1150 Scratch-Workstation Bedienungsanleitung Seite 27

Cue Sequence Scratch-function:
Press and hold the Scratch-button until the LED flashes. Everytime you touch the scratch-wheel, the player
jumps from one memorized cue-point to the next.
27. FX SEL: BUTTON
This button is used to select betwenn SCRATCH / FILTER / ECHO / TRANS and SKID / PHASE / FLANGER
/ PAN. The LED above the FX SEL. button will indicate which effects are selected.
28. SCRATCH/SKID-BUTTON
With the Scratch-button, you can activate the Scratch-function. Please refer to the explanations under 6.8
Interactive scratch-wheel and 6.11 Effects.
29. FILTER/PHASE-BUTTON
With the Filter/Phase-button, you can activate the Filter-function or Phase-function. Please refer to the
explanations under 6.11 Effects.
30. HOLD-BUTTON
With the Hold-button, you can hold the settings of the effect-parameters and sample-parameters. Please
refer to the explanations under 6.11 Effects.
31. ECHO/FLANGER-BUTTON
With the Echo/Flanger-button, you can activate the Echo-effect or Flanger-effect. Please refer to the
explanations under 6.11 Effects.
32. TRANS/PAN-BUTTON
With the Trans/Pan-button, you can activate the Trans-effect or Pan-effect. Please refer to the explanations
under 6.11 Effects.
33. REVERSE-BUTTON
With the Reverse-button, you can activate the Reverse-function. Please refer to the explanations under 6.11
Effects.
FX SEL.
FILTER FILTER
SCRATCH SCRATCH
HOLD HOLD
SKID SKID PHASE PHASE
28 29 30 31
27/68
ECHO ECHO TRANS TRANS
REVERSE REVERSE
PAN PAN
FLANGER FLANGER
32 33 34
10602298_V_1_0.DOC