Omnitronic DJS-1150 Scratch-Workstation Bedienungsanleitung Seite 26

15. 4/8/16/100%-BUTTONS
With these buttons, you can select the speed-adjusting range between +/- 4 %, +/- 8 %, +/- 16 % or
+/- 100 %. Please refer to 6.6 Adjusting the playback-speed.
16. MAIN TEMPO-BUTTON
With the MAIN TEMPO-button, you can adjust the pitch of an adjusted playback speed. Press the MAIN
TEMPO-button in order to adjust the pitch.
17. PITCH ON/OFF-BUTTON
With this button, you can switch the speed-adjustment via the pitchfader off (LED off). Please refer to 6.6
Adjusting the playback-speed.
18. BPM-BUTTON
Via the BPM-button, you can switch the display from beats per minute (BPM) to speed-adjustment in %.
Press and hold the BPM-button in order to switch form manual to automatic beatcounter.
19. TAP-BUTTON
Via the Tap-button, you can display the beats per minute of a track. Press the button in the rhythm of the
music. The display shows the current beats per minute (BPM).
20. PITCHFADER
You can adjust the desired speed with the Pitchfader. The display shows the current percentage.
21. BANK-BUTTONS
You can memorize a Cue-point and a sample on every Bank-button. The memorized Cue-button or the
sample (press Sampler-button first) can be recalled via the respective Bank-button.
22. TIME-BUTTON
The display can be switched from track remain time (Remain) to total remain time (total remain) or track
playback time (Elapsed).
23. SGL/CTN-BUTTON
For choosing single playback or continous play. By pressing this button once, the display shows „SINGLE".
The current track is then played once and the player goes into Pause-mode at the next track-start.
24. PITCH BEND-BUTTONS
With the Pitch Bend-buttons, you can adjust the playback-speed temporarily by up to +/- 100 %. Please refer
to 6.6 Adjusting the playback-speed.
If syou press and hold the Pitch Bend - button, the playback speed decreases down to 0. This effect is
comparable with the Motor Off-effect.
25. BEAT SYNC-BUTTONS
Via the Beat Sync-buttons, you can adjust the effects to the current track's beat. Please refer to the
explanations under 6.12 Beat Sync-function.
26. SCRATCH-WHEEL
Playback-mode:
Via the Scratch-wheel, you can adjust the playback-speed by +/- 100 %. Please refer to the explanations
under 6.6 Adjusting the playback-speed.
Pause-mode:
In the pause-mode, the current frame is repeated as soon as you turn the Scratch-wheel.
Via the Scratch-wheel, you can slowly search within a title forwards and backwards. In this way, you can
easily find a Cue-point for example.Turn the Scratch-wheel to the right in order to search forwards and turn it
to the right in order to search backwards. The faster you turn the Scratch -wheel the higher the searching-
speed. Please refer to the explanations under 6.7 Cueing.
Vinyl Cue-function:
If you press the Scratch-button, you can activate the VINYL CUE-function. This function disables the frame-
function of the CD-player and you can search for the Cue-point as with a turntable. Please refer to the
explanations under 6.8 Interactive scratch-wheel.
Cue Scratch-function:
Press and hold the Scratch-button until the LED is lit. The aluminium surface of the scratch-wheel is now
activated. When touching the scratch-wheel, the player returns to the cue-point.
26/68 10602298_V_1_0.DOC