Knowing Your Design Kettle Cool Touch; Important Safeguards; General Safety Instructions - Gastroback 42436 Design Wasserkocher Cool Touch Bedienungsanleitung

KNOWING YOUR NEW DESIGN KETTLE COOL TOUCH
1
2
3
4
5
6
7
8
9
10
11
1 | Spout
2 | Splashing protection
To reduce splashing when boiling water is poured.
3 | Lid
Opens when pressing the lid button.
4 | Lid button
Pull this lever up to open the lid.
5 | Display
Showing the current water temperature or the current-
ly set temperature.
6 | Temperature selection buttons „KEEP
WARM" and „TEMP"
Press here to select the desired water temperature
28
7 | ON/OFF button
Press here to start or cancel operation.
8 | Handle
9 | Kettle
May heat 0.5 litre (MIN) to 1.5 litre (MAX) of clear
tap water.
10 | Base
11 | Power socket
For automatically connecting the kettle to the power
supply, when the kettle is placed onto the base.

IMPORTANT SAFEGUARDS

Carefully read all instructions, before operating this appliance
and save for further reference. Do not attempt to use this appli-
ance for any other than the intended use, described in these instructions.
Any other use, especially misuse, can cause severe injuries or damage by
electric shock, heat, or fire.
These instructions are an essential part of the appliance. Do not pass the
appliance without this booklet to third parties.
Any operation, repair and technical maintenance of the appliance or any
part of it other than described in these instructions may only be performed
at an authorised service centre (see: 'Warranty').
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.

GENERAL SAFETY INSTRUCTIONS

This appliance is for household use only and NOT intended for
use in moving vehicles. Do not operate or store the appliance in
humid or wet areas or outdoors. Any use of accessories, attachments or
spare parts that are not recommended by the manufacturer or damaged
in any way may result in injuries to persons and/or damage.
DO NOT leave the base of the appliance unattended while connected
to the power supply.
Check the entire appliance regularly for proper operation (e.g. check for
distortion, cracks, leaks, corroded pins of the power plug). Do not operate
the appliance, when liquids escape during operation. Do not operate the
appliance, when the appliance or any part of it is likely to be damaged,
to avoid risk of fire, electric shock or any other injuries to persons and/or
damage. The appliance or its parts are likely to be damaged, if the appli-
ance has been subject to inadmissible strain (e.g. over heating, mechanical
or electric shock), or if there are any cracks or leaks, excessively frayed or
melted parts, or distortions, or if the appliance is not working properly. If one
of these cases occur during operation, immediately unplug the appliance,
and get in contact with an authorized service centre for examination and/
or repair. Do not attempt to use the appliance when the appliance or any
part of it is damaged. Do not attempt to open the housing of the appliance.
29