sammic AB-3 Bedienungsanleitung Seite 25

FOREWORD
• This manual is an integral part of the pro-
duct, providing all the information required
to ensure correct installation, operation and
maintenance of the machine.
• Read the manual carefully, making refe-
rence to it for machine operation. Keep the
manual in a safe place where it can be ac-
cessed by all authorised operators (instal-
lers, operators and service personnel).
• The machine has been constructed in com-
pliance with the directives 73/23/CEE (low-
voltage), 89/336/CEE (electromagnetic
compatibility) and 98/37/CE (machines; for
certain models only).
• Installation must be performed in com-
pliance with National and Local Standards,
by professionally qualified staff and accor-
ding to the manufacturer's instructions.
• Any contractual and extra-contractual lia-
bility of the manufacturer is excluded due
to damage caused by errors during instal-
lation and use and, however, failure to com-
ply with the National and Local Standards
in force and the instructions supplied by
the manufacturer.
• Make sure that the supplied or specified
components are used.
• Before performing any cleaning or mainte-
nance operation, disconnect the appliance
from the electric power supply mains by
operating on the system switch and/or the
product switch.
• In the event of faults and/or bad functio-
ning, deactivate the appliance and do not
attempt any repairs or direct intervention.
07/2013
CAUTION
THE FOLLOWING OPERATIONS
AND THOSE HIGHLIGHTED
BY THIS SYMBOL MUST NOT BE
PERFORMED BY THE APPLIANCE USER
In particular:
• Electrical connections
• Water connections
• Installation
• Testing
• Repairing machine components
• Disassembly of the appliance
and/or its components
• Adjustments and calibration
• Cleaning the appliance and maintenance of:
- Electrical parts,
- Electronic parts,
- Mechanical parts,
- Refrigeration system parts
THE TExT WITH THIS SYMBOL
IS OF PARTICULAR IMPORTANCE
OR POTENTIAL DANGER SIGNALS
i
NOTA clarifies the current operations
BLAST CHILLER ISTRUCTION
3