Respekta PYRO 9 TOUCH Bedienungs- Und Installationsanleitung Seite 54

operated during the system time setting, you can operate the oven lamp by lamp key in
other status.
When the oven starts working according to the cooking functions, the oven lamp is turned
on by default. At this time, the oven lamp can be switched on and off by the lamp key"
In the abnormal case of the oven, when the temperature is greater than 300 ° C or the
temperature sensor is short-circuited and open circuit, the oven light is automatically turned
off, and the oven lamp cannot be controlled by the key operation.
5、 Reservation function
5.1 Reservation setting: After choosing functions, well set time and temperature(before
start-up), touch"
time +set cooking time+ default reservation time 5 minutes),
minute flash(refer to pic 8). You can adjust set cooking end time by pressing "
and minute will adjust by "1" a unit. After well set the reservation time,press start key
" to begin the reservation,oven will enter to reservation mode automatically.
"
 All the elements will not work under reservation mode.
 Reservation mode display:clock place display system time,temperature place display
menu or set temperature,screen lock is activated,default reservation is 5 minutes,and
max is 24 hours.
 If exceeding 10s without confirmation, the oven will back to standby status.
 After reservation,reservation icon disappears,the oven will enter working status.
 The set reservation function can not be paused or amended, if you want to cancel the
reservation under reservation status,you need to press and hold the power key
canel the reservation,then oven will enter standby mode.
 The cooking time and temperature can not be changed under the reservation function.
 Reservation end time query function: After the reservation function starts working, you
can touch the reservation key"
reservation key again to exit the inquiry, otherwise the 10S will automatically return the
reservation end time query.
, time will switch to cooking end time setting (default end time=system
"
Pic 8: Reservation function working diagram
" to query the reservation end time, and touch the
17
will flash ,clock will display
+
" and "
".
",
to
" "