Respekta PYRO 9 TOUCH Bedienungs- Und Installationsanleitung Seite 53

Pic 7: Actual parameter diagram during working
If exceeding 10s without any confirmation, start status will return to stand-by mode.
When switching to cooking time or temperature, the display screen will flash display
corresponding cooking time or temperature(1 time / S), and stop flashing after confirm
starting. Working time will begin to countdown after start-up.(countdown by second).
3.4 Working display:After confirm starting, under working status, " " shows, screen lock
activates, the display shows " " and " ". At this time, except for pressing pause key
, power key" " and lamp key, other keys are all couldn't work. After confirm
" "
starting,the clock place will display working countdown time 10s and the temperature place
will actual cavity temperature 10s and switch circularly; And display current system time 2s
and set temperature 2s and switch circularly.If your choosing function have fan, the display
will show " "and clockwise rotation.
3.5 Pause function :If you want to pause or reset working parameter or mode, touch
" "under working status, lock and all element stop work(except oven lamp and fan), and
back light of pause key " "will flash (1s/time). Clock place will display remain working time
and countdown time will be paused, temperature will display oven actual cavity temperature.
3.6 Pause and amending the function:After the oven has been paused, you can reset
working temperature and time. Re-touch" " , system will start working according to your
reset mode,clock place working time continues to countdown.Note:The self-cleaning
function can not be paused and amended.
3.7 Cancel cooking work:If you want to let the oven stop working, press and hold the
power key" ", the display screen will enter to standby mode, exhaust fan will stop
working after cavity temperature is lower than 100℃.
3.8 Working tips: Oven will prompt user for 2S when it closes to the set temperature. At the
end of oven cooking time, the buzzer will continuously prompt for 10 times then oven goes
into function to be selected status, and exhaust fan will stop working after cavity
temperature is lower than 100℃.
4、Oven lamp function
The oven light key controls the oven lamp separately, independent of other keys.When the
lamps are on ,the screen and lamp icon lights up. The oven lamp is turned off by default
when the oven is powered on. After the oven is powered on, except the lamp key can not be
16