2.2 Time setting under function to be selected mode
If not setting the time when first connected to the main supply,you can adjust the time using
+
combination button "
" and "
" under function to be selected mode,detailed operation is
same as the above.
3、The choice of function
3.1 Selection function:Under function to be selected mode, you can touch function
selector "
to choose 11 functions, the corresponding function icons are as below ( oven
"
function will remember the last operation).
Pic 5: Oven function mode
3.2 Temperature adjustment:When choosing function, clock position will display
corresponding function mode default cooking time(It will display "ECO" under Eco mode),
temperature will dispay corresponding function mode default temperature and
flash,temperature icon "
"will keep bright(The default cooking time and temperature for
each function mode please refer to the part "Working mode menu" below),you can adjust
+
the cooking temperature by pressing "
"or "
" at this time,the adjustment will be 5
degrees for a unit(The adjustable temperature range for each function mode please refer to
the part "Working mode menu" below as well).
Please note: When selecting the function, the defrost function and the high temperature
self-cleaning function can only adjust the cooking time, and the temperature cannot be
adjusted. At this time, the time value flashes.
3.3 Time adjustment: After temperature adjustment is completed, touching" "to switch to
cooking time adjustment, clock place will display corresponding function mode default
cooking time and flash(minute will be shown as 30:00), you can adjust the cooking time by
+
pressing "
"or "
"(cooking time adjustable range is 05:00-90:00 minutes),time will change
5 minutes as a unit. (The minimum adjustable working time is minute, not second, just can
show 05:00 10:00 30:00,etc.)
After setup function, cooking time and temperature, touch
to start working.
Pic 6: Set temperature parameter diagram during working
15