Herunterladen Inhalt Inhalt Diese Seite drucken

Limited Warranty - McHale 994BS Betriebsanleitung

Rundballenzerteiler
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 12
 Keep the blade sharp. Although the blade is of high-quality
steel, it must have regular attention. It may require a few
minutes of gentle fine filing just to maintain the edge. Any
nicks or burrs must be filed away.
WARNING: Never use a rotary grinder to sharpen the
blade. Always wear heavy gloves when sharpening
the blade.
 To sharpen the blade: use a second cut flat face file, place
the file on the chamfered face of the blade and draw-file
along the blade line. Do not file along the flat face of the
blade.
 In the event of serious irreparable damage to the bale
splitter blade, a replacement blade may be fitted by cutting
the blade away from the frame and a replacement blade
welded into position.
11. Storage
1. Move the loader onto a level area where you intend to store
the device.
2. Stop the engine, apply the parking brake, remove the key,
and disconnect the McHale 994 from the tractor's front end
loader or three point linkage.
3. Wash & clean the device thoroughly and paint any bare or
damaged metal.
4. Coat blade, all pivot points and exposed ram pistons with
grease.
5. Any maintenance or repairs should be carried out at this
stage.
6. It is preferable to store this type of equipment inside a dry
shed; however, if it is being stored outside, cover it with a
waterproof cover.

12. Limited warranty

McHale Engineering, Ballinrobe, Co. Mayo, Ireland
(hereinafter called "the company") warrants to the original
retail purchaser that new products sold and registered with the
company, shall be, at the time of delivery, free from defects in
material and workmanship, and that such equipment is
covered under limited warranty providing the machine is used
and serviced in accordance with the recommendations in the
Operator's manual.
This limited warranty covers the equipment for a period of one
year starting from the date the equipment is commissioned.
INFORMATION: Online submission of the pre-
delivery inspection (PDI) form by the dealer
(importer) is taken as evidence of the delivery of the
machine to the original retail purchaser. This is
compulsory, and is required to record the machine in
the McHale warranty system.
1. These conditions are subject to the following
exceptions:
 Hydraulic rams, valves, hoses, tines etc. are not covered
by this limited warranty, but are subject to the warranty of
the original manufacturer. Submit warranty claims applying
to these types of parts in the normal way. Compensation
will be paid in accordance with the warranty agreement of
the manufacturer concerned.
 This limited warranty does not apply to failure through
normal wear and tear, damage resulting from negligence or
from lack of inspection, from abuse or misuse, from lack of
maintenance and/or if the machine has been involved in an
accident, lent out or used for purposes other than those for
which it was intended by the company.
 This limited warranty will not apply to any product that has
been altered or modified in any way without the express
permission of the company, or if parts not approved by
McHale are used in repair.
 The company take no responsibility for any additional
costs, including loss of oil and/ or consumables incurred
during the failure and repair of a product
 The company cannot be held responsible for any claims or
injuries to the owner or to the third party, nor to any
resulting responsibility.
 Also, on no account can the company be held liable for
incidental or consequential damages (including loss of
8
McHale 994
anticipated profits) or for any impairment due to failure, a
latent defect or a breakdown of a machine.
2. The customer will be responsible for the following
costs:
 Normal maintenance such as greasing, maintenance of oil
levels, minor adjustments, etc. as specified in the
Operator's manual.
 Labour charges other than originally agreed, incurred in the
removal and replacement of components.
 Dealer's travel time and travel costs to and from the
machine.
 Parts defined as normal wear items such as, but not limited
to, PTO shafts, chains, tyres, bearings, blades, knives,
tines, tine bars, slip clutches, and slides, etc. that are not
covered under the limited warranty.
3. The importer will be responsible for the following costs:
 All warranty labour charges.
4. The limited warranty is dependent on the strict
observance of the following conditions:
 The machine has been put in service by the dealer
according to our instructions.
 The online pre-delivery inspection (PDI) form has been
correctly completed by the dealer and a signed, dated copy
retained and made available for McHale.
 The warranty claim must be submitted by the original
retailing McHale dealer only using our online claims
system.
 The decision of the Company in all cases is final.
 Damaged parts should be held by the dealer until credit
has been given, or a returns request has been issued.
 Parts must be returned to McHale with the McHale claim
number written clearly on each individual part. These parts
must be free from dirt and oil. If a part is returned in an unfit
state, the claim will be refused.
 If damaged parts have been returned to the company and
warranty is refused, the dealer is allowed a period of one
month from the date of receiving our notification to request
the return of the damaged parts to the dealer site.
5. Further conditions - limits of application and
responsibility:
 This limited warranty cannot be assigned or transferred to
anyone without the prior written consent of the Company.
 McHale Dealers have no right or authority to assume any
obligation or take any decision on the Company's behalf,
whether expressly or tacitly.
 Technical assistance given by the company or its agents for
repairing or operating equipment does not lead to any
responsibility on the Company's behalf and cannot under
any circumstances bring novation or derogation to the
conditions of the present limited warranty.
 The Company reserves the right to incorporate changes in
its machines without prior notice and without obligation to
apply these changes to machines previously
manufactured.
 The present limited warranty excludes any other
responsibility, whether legal or conventional, express or
implied, and there are no warranties extending beyond
those defined herein.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis