Reset To Factory Settings - Dimplex Plx 050E Montage- Und Gebrauchanweisung

English
Press  or  to set the first digit of the number

code between 0 and 9.
Press the ENTER key.

Set digits 2, 3 and 4 of the number code in the

same way.
Press the ENTER key. The functions runback timer

(rb) and minimum/maximum temperature (SP) are
locked.
Confirm the BACK key to return to the standard

display.
10.6 Window monitoring
The room heating device is equipped with a monitoring
function that detects whether unnecessary energy is
being consumed due to an open window. In this case,
the heating device reduces the heat output. The
WINDOW MONITORING function is activated at the
factory.
NOTE NOTE
The controller may read sudden temperature
decreases in drafty or poor insulated environments as
well as if the heater is undersized for the room.
In this case the feature should be disabled
This function can be activated or deactivated as
follows:
Press and hold the MENU key and the FORWARD

key for five seconds.
rb display flashes.

Press  or  to select the WINDOW symbol. The

symbol flashes.
Press the ENTER key. The ON symbol flashes.

Press or to select the ON or OFF symbol.
 

The symbol flashes.
EN-11
All manuals and user guides at all-guides.com
10.7
Resets all settings made by the user to the pre-set
factory settings.
1810/C
Press the ENTER key.

Confirm the BACK key to return to the standard

display.

Reset to factory settings

Press and hold the ENTER key for five seconds.

INFO display flashes.
Press  or  to select the Fr display. The symbol

flashes.
Press the ENTER key. Display N (= no) flashes.

Press or to select the Y display. The symbol
 

flashes.
Press the ENTER key. All values are reset to

factory settings.
Set the time and date.

PLX 050E - PLX 300E
www.dimplex.de/en