Dimplex PLX 050E Montage- Und Gebrauchanweisung Seite 18

English
9.4 Frost protection
Specification of a frost protection temperature of 7° C
for the following 24 hours.
Press the MENU key.

Press  or  to select the FROST symbol. The

FROST symbol flashes. Press the ENTER key.
FROST symbol and temperature 7° C are
displayed.
9.5 Runback timer
The runback timer enables the user to activate a one-
off, time-limited heating program.
Press the MENU key. The TIMER symbol flashes.

Press the ENTER key. The ON symbol flashes.

Press  or  to select the OFF symbol. The OFF

symbol flashes.
Press the ENTER key =>Heating operation off.

Press the FORWARD key. Heating operation takes

place for 30 minutes (factory setting).
Where necessary, change the room temperature

with  or  .
To end prematurely, switch off the heating device.

EN-7
All manuals and user guides at all-guides.com
Heating duration runback timer
The maximum heating duration, limited to 2 hours at
the factory and adjustable in four stages of 30 minutes
each, can be changed as shown in the table.
1810/C
Press and hold the MENU key and the FORWARD

key for five seconds.
rb display flashes.

Press the ENTER key. The ON symbol flashes.

Press the ENTER key. The heating duration

program flashes. For variants, see table, left
column (factory setting 2 h).
Press or to select the desired heating
 

duration program. Press the ENTER key. The room
temperature flashes.
Use  or  to set the room temperature and

confirm with ENTER.
Confirm the BACK key to return to the standard

display.
Heating Press the FORWARD key:
duration
program
1 time 2 times
30 minutes 00:15
01:00 h 00:15
01:30 h 00:15
02:00 h
00:30
(factory)
04:00 h 01:00
06:00 h 01:30
08:00 h 02:00
PLX 050E - PLX 300E
3 times 4 times
00:20 00:25 00:30
00:30 00:45 01:00
00:30 01:00 01:30
01:00 01:30 02:00
02:00 03:00 04:00
03:00 04:30 06:00
04:00 06:00 08:00
www.dimplex.de/en