Dimplex PLX 050E Montage- Und Gebrauchanweisung Seite 17

PLX 050E - PLX 300E
9.2 Timer week program
NOTE NOTE
It is advisable to use the timer operating mode to
reduce the operating costs. Using the device in manual
heating operation can result in increased operating
costs.
The timer is pre-programmed at the factory. Four time
blocks are available per day, which can be adapted
individually for each weekday.
To change these profiles, carry out the following steps:
Press the MENU key. The TIMER symbol flashes.

Press the ENTER key. The ON symbol flashes.

Press  or  to select the TIMER symbol. The

TIMER symbol flashes. Press the ENTER key.
Select a weekday.

1 = Monday 5 = Friday
2 = Tuesday 6 = Saturday
3 = Wednesday 7 = Sunday
4 = Thursday
Use  or  to select the day. Press the ENTER

key. P1 (Program 1) flashes.
Press the ENTER key. Switch-on time flashes.

Press the ENTER key. The hours display flashes.

Use  or  to set the hours. Press the ENTER

key. The minutes display flashes.
Use  or  to set the minutes. Press the ENTER

key. Room temperature flashes.
Use or to set the temperature. Press the
 

ENTER key. Switch-off time flashes.
Press the ENTER key. The hours display flashes.

Use  or  to set the hours. Press the ENTER

key. The minutes display flashes.
www.dimplex.de/en
All manuals and user guides at all-guides.com
9.3
The timer week program is deactivated in manual
operation.
The room temperature specification takes place
manually.
1810/C
Use  or  to set the minutes. Press the ENTER

key. P2 (Program 2) flashes.
The programs P2, P3 and P4 can be set in the

same way.
To copy the newly set programs P1 - P4 to other

days, press ENTER. The COPY display flashes.
Press the ENTER key. The COPY display appears

permanently. The weekday flashes.
Press  or  to select more weekdays. Confirm

each one with the ENTER key.
The selected weekdays are shown at the top edge

of the display.
To finish, press  or 

COPY display flashes.
Press the ENTER key. The settings are saved. The

ON symbol flashes.
Confirm the BACK key to return to the standard

display.
Manual operation
NOTE NOTE
Press the MENU key.

Press or to select the MANUAL symbol. The
 

MANUAL symbol flashes. Press the ENTER key.
The ON symbol flashes. Press the ENTER key.

Use  or  to set the room temperature.

English
to select COPY. The
EN-6