Operation; A) Switching On; B) Settings (Pressure); C) Settings (Timer) - Renkforce 2302377 Bedienungsanleitung

10. Operation

a) Switching on

• Place the product on a flat, firm surface. The product may only be operated in a horizontal position.
Never place the product in or under water, there is a risk of death due to an electric shock! Never place the
product in a flood-prone area.
• Connect the power plug (9) of the product to a mains socket. "Power on" is shown on the display (1).
• The product starts to pump water. While the product is running, "Suction in progress" is shown on the display. Then
the display will show the values for "Flow" and "Pressure".
If no water is pumped, it can be indicative of air in the pump. Wait for a few seconds or remove the power
plug briefly and plug it back in; rock the product gently back and forth to remove air from the pump.

b) Settings (pressure)

Settings are optional. You do not need to make any settings to operate the product.
• Enter settings: Press and hold ▲button (3) and OK button (4) simultaneously for 3 seconds. Press ▼button (2)
or ▲button to select the options. Press OK button to confirm.
• Option "Turn on pressure": Press ▼button to reduce the pressure. Press ▲button to increase the pressure.
• Return to settings: Press and hold ▲button and OK button simultaneously for 3 seconds.
• After finishing the settings, press ▼button or ▲button to select "Exit". Press OK button to confirm.

c) Settings (timer)

Settings are optional. You do not need to make any settings to operate the product.
• Enter settings: Press and hold ▲button (3) and OK button (4) simultaneously for 3 seconds. Press ▼button (2)
or ▲button to select the options. Press OK button to confirm.
• Option "Time set": Press ▼button or ▲button to select "The day" or "Every day". Press OK button to confirm.
• Option "The day": After selecting this option, "Time now" is shown on the display. Press ▼button or ▲button to
set the time. Press OK button to confirm.
• Option "Every day": After selecting this option, "Time on" / "Time off" is shown on the display. Press ▼button or
▲button to set the on/off time of the product. Press OK button to confirm.
• Return to settings: Press and hold ▲button and OK button simultaneously for 3 seconds.
• After finishing the settings, press ▼button or ▲button to select "Exit". Press OK button to confirm.
d) Switching off
• Press OK button during operation. "Pump off" is shown on the display.
• Press OK button again to switch off the product.
• Disconnect the power plug from the mains socket.
23