Deactivating The Lock Mode Temporarily; Muting The Audio Signal Or Deactivating The Rf Signal - Sennheiser ew 100 Serie Bedienungsanleitung

ew G3 Set BDAs.book Seite 22 Mittwoch, 30. November 2011 5:52 17
Using the devices

Deactivating the lock mode temporarily

You can activate or deactivate the automatic lock mode via the
page 27). If the lock mode is activated, you have to temporarily deactivate it in order to be
able to operate the devices.
EM 100 G3
SK
How you are using the devices determines how long the lock mode remains deactivated:
When you are in the operating menu
The lock mode is deactivated as long as you are working with the operating menu.
When one of the standard displays is shown
The lock mode is automatically activated after 10 seconds.
The lock mode icon flashes prior to the lock mode being activated again.

Muting the audio signal or deactivating the RF signal

To
EM 100 G3
22
EM 300/500 G3
SET Press
Press
Press
SET
SKM
SET Press
Press
Press
SET
mute the audio signal:
EM 300/500 G3
Press
Press
"Auto
Result
Press "Locked" appears on the display panel.
Turn "Unlock?" appears on the display panel.
Press The lock mode is temporarily deactivated
(see below).
Result
Press "Locked" appears on the display panel.
Press "Unlock?" appears on the display panel.
Press The lock mode is temporarily deactivated
(see below).
Result
Press "RX Mute Off?" appears on the display
panel.
Press "RX Mute On?" appears on the display
panel.
Lock" menu item (see