Overall Dimensions; Firing Rate - Riello Gulliver RS5F Montage- Und Bedienungsanleitung

2.2

OVERALL DIMENSIONS

503
−
278 300 225
216
2.3

FIRING RATE

Firing rate has been determined in conformity with the provision of standard EN 676 (from 3.4 to - 0.2 mbar).
In addition, burner can be applied for operation with the combustion chamber featuring negative pressure
(up to - 2 mbar) according to the approval terms provided for in standard EN 746-2 for the whole unit com-
plete with equipment.
4.0
3.2
2.4
1.6
0.8
0
-0.4
-1.2
-2.0
150 170
D4458
130,000
TEST HEAT GENERATOR
The firing rate has been defined according to EN 676 standard.
COMMERCIAL HEAT GENERATORS
The burner-heat generator team does not pose problems provided the generator and size of the combustion
chamber are similar to those provided for in standard EN 676.
If, on the other hand, the burner is teamed with a commercially-available heat generator and the combustion
chamber is much smaller than the size indicated in standard EN 676, you should consult the manufacturers.
20094559
−
203
150
EN 676
EN 746-2
190 210 230
170,000 210,000
300
150
D6340
250 270 290
250,000
4 GB
218
170
200
310 330 350 kW
290,000 kcal/h
Thermal power