Ending A Call; Register Your New Hand Set On A Base - Sagem D50H Bedienungsanleitung

Livre D50H EN.book Page 9 Vendredi, 12. septembre 2003 4:34 16
G
ETTING STARTED

Ending a call

At the end of the conversation, press the red key

Register your new hand set on a base

To register a new hand set on a base it is necessary to:
• put the hand set to registration mode,
• put the base to matching mode.
Then matching (mutual recognition of the base and the new hand set) will
be done automatically (registration may take several seconds).
Get hold of the hand set to register:
On the navigator key
SETTINGS, confirm with OK.
Select ADVANCED SET. using keys
SET HANDSET
Select SET HANDSET using keys
Return Valid
Select REGISTRATION. Press Valid
REGISTRATION
Return Valid
Press Yes
REGISTER HS?
No Yes
On the base:
Set the base with which you want to link the hand set to matching mode:
• If you have a base incorporating an answering machine, simulta-
neously press the two top pushbuttons of the base
ral seconds.
• If you have a base that does not incorporate an answering machine,
press the push button
The green light of the base quickly flashes. The base is in matching mode.
The second hand set and the base both try to hook up. Matching may take
several seconds.
Once the hand set is registered, the hand set automatically exits from the
matching mode and indicates end of registration.
, press
, the hand set switches to registering mode.
on the base for several seconds.
You can also put your base in matching mode using a hand set
already registered by selecting the matching function in the SET-
TINGS/ADVANCED SET./SET BASE menu.
9
.
or until the screen displays
or . Press Valid .
or . Press Valid .
.
for seve-