Getting Started - Sagem D50H Bedienungsanleitung

Livre D50H EN.book Page 6 Vendredi, 12. septembre 2003 4:34 16
G
ETTING STARTED
G
ë
ETTING STARTED
To use your SAGEM D50H hand set on the public telephone network from
your base, you must register and match it with a base compatible with the
European GAP standard.
Get the user brochure on the base to which you want to register, match
your SAGEM D50H hand set and find the paragraph concerning the
registering or matching of an additional hand set.
You have just put the batteries in your hand set and closed the flap.
The language selection screen is displayed. Press
ENGLISH
Return Valid
desired language is displayed. Validate with Valid
When the message "PLEASE REGISTER" is displayed, turn your base to
PLEASE REGISTER
Alarm
Mute
matching mode, then from the navigateur
screen displays SETTINGS, confirm with OK.
Select ADVANCED SET. using keys
SET HANDSET
Select SET HANDSET using keys
Return Valid
Select REGISTRATION. Press Valid
REGISTRATION
Valid
Return
Press Yes
REGISTER HS?
No Yes
"HANDSET IN REGISTR.MODE" is displayed on the screen to tell you
HANDSET IN
REGISTR.MODE
that the base search procedure has started.
At the end of the procedure, the message "REGISTERED" is displayed on
REGISTERED
the screen.
If an error occurs, the message "REGISTRATION FAILED" is displayed
and the message "REGISTRATION" is again displayed on the screen.
Press Valid
or
or
.
, the hand set switches to registering mode.
and press Yes to restart registration.
6
or until the
.
, press or until the
. Press Valid .
. Press Valid .